|
XJCM-9A Sun Simulator (AAA Class)
- Low height upward illumination and small footprint allow integration into automated module assembly lines
- I-V curve,Voc,Isc,Pm,Vm,Im,FF,Tm.
- Uniformity of illumination ±2% (A class)over entire test area.
- Twice flash test with pulse time ( 2x10ms), ASTM E927 and (IEC 60904) Class A spectrum , intensity can be adjusted from 20 to 120mW/cm2,measured by calibrated reference cell.
- Constant intensity, instablity<0.5% (A class)
- Tests either crystalline or thin film modules and cells.
- Software provides system diagnostica and saves module parameters and IV curves to databasea.
- Maximum Module Dimensions: (other XJCM-9A SUN SIMULATOR sizes are available) length: 200cm x width: 110cm
| Light Source |
- Long-arc pulsed xenon lamp
- Pulse Width : 20ms
- Full area intensity : 20 to 120mW/cm2
- Lamp lifetime nomina : 300,000 flashes
|
| Illumination Uniformity |
- ±2% over 200cm x 100cm area
|
| Measurement Range |
- Voltage : 0-1/10/50/100V
- Current : 0-0.25/1/2.5/10A
|
| Resolution (lowest range) |
- Voltage :1mV
- Current : 0.5mA
|
| Equipment Dimensions |
- Width : 150cm x Depth : 250cm x Height : 90cm
|
| Equipment Net Weight |
|
| Utilities Requiremnts Electricity |
- 190-240VAC,10A,50/60Hz,single phase
|
|
|
Products
Services
