|
XJCM-9 Solar Cell Tester (AAA Class)
Features and Benefits :
- I-V curve, Voc, Isc, Pm, Vm, Im, FF, Tm
- Uniformity of illumination ±2% (class A) over entire test area
- Pulsed xenon light source :
- Single long pulse with constant intensity for up to 20ms. Constant intensity,instablity<0.5%(class A).
- Filtered to ASTM E927 and (IEC 60904-9) Class A spectrum , 3s interval to next pulse.
- Variable intensity from 20 to 120mW/cm2, measured by calibrated reference cell
- Tests either crystalline or thin film modules and cells :
- Maximum Module Dimensions:(other XJCM-9 SOLAR CELL TESTER sizes are available) length : 16cm & width : 16cm
- Light source : Long-arc pulsed xenon lamp
Full area intensity : 20 to 120mW/cm2
Lamp lifetime nominal : 300,000 flashes Illumination Uniformity : ±2% over 16cm x 16cm area
| Measurement Range |
- Voltage : 0-1V
- Current : 0-10A
|
| Resolution (lowest range) |
- Voltage : 0.3mV
- Current :0.5mA
|
| Equipment Dimensions (excluding computer system) |
- Width : 50cm
- Depth : 50cm
- Height : 80cm
|
| Equipment Net Weight |
|
| Utilitiy Requirements |
- Electricity : 190-240VAC,10A,50/60Hz,single phase
- Compressed air : 100 1/min.at550kpa
|
| Options |
- Filtered calibrated reference cell for testing thin film modules special voltage and current measurement ranges.
- Throughput: up to 720 cells/hour(operator dependant)
|
To enquire about the desired product(s), just check the box and then click “Inquiry Now” button which is provided below.
|
Products
Services
